d a t a s h e e t : c l d - c t 1 8 1 . 0 0 0 cree ? smd led model # lp6-ppp2-0-n data sheet 120-degree, 6.0 x 5.0-mm, smt led in full color with white diffused lens applications indoor and outdoor displays backlighting camera flash rgb full-color displays absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit r g b forward current note 1 i f 80 80 80 ma peak forward current note 2 i fp 200 100 100 ma reverse voltage v r 5 5 5 v power dissipation p d 200 410 410 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 110 110 c junction/ambient 1 chip on note 3 r thja 250 210 210 c/w junction/ambient 3 chips on note 3 r thja 500 300 300 c/w junction/solder point 1 chip on r thjs 150 130 130 c/w junction/solder point 3 chips on r thjs 150 160 160 c/w notes: single-color light. pulse width 0.1 msec, duty 1/10. r th test condition: mounted on pc board fr 4 (pad size 40 mm 2 ) typical electrical & optical characteristics (t a = 25c) characteristics condition symbol values unit r g b wavelength at peak emission i f = 50 ma peak 620 521 468 nm dominant wavelength i f = 50 ma dom 610~625 514~534 460~480 nm spectral bandwidth at 50% i rel max i f = 50 ma 24 38 28 nm viewing angle at 50% i v i f = 50 ma 2? 120 120 120 deg forward voltage i f = 50 ma v f(avg) 2.0 4.0 4.0 v v f(max) 2.5 5.1 5.1 v luminous intensity i f = 50 ma i v(min) 450 710 280 mcd i v(avg) 710 1000 450 mcd reverse current (max) v r = 5 v i r 10 10 10 a ? ? ? ? 1. 2. 3. subject to change without notice. www.cree.com/ledlamps
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cld-ct8.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps standard bins for lp6-ppp2-0-n (i f = 50 ma) lamps are sorted to luminous intensity (i v ) and dominant wavelength ( d ) bins shown. orders for LP6-PPP2-01-N1 may be flled with any or all bins contained as below. all luminous intensity (i v ) and dominant wavelength ( d ) values shown and specifed are at i f = 50 ma. x or above w v u x or above w v v or above u t important notes: all ranks will be included per delivery; rank ratio will be based on the dice distribution. tolerance of measurement of luminous intensity is 10%. tolerance of measurement of the dominant wavelength is 1 nm. tolerance of measurement of v f is 0.05 v. packaging methods are available for selection; please refer to the cree led lamp packaging standard docu - ment. please refer to the cree led lamp reliability test standards document for reliability test conditions. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely. 1. 2. 3. 4. 5. 6. 7. 625 nm 610 nm 534 nm 514 nm 480 nm 460 nm dominant wavelength ( d ) dominant wavelength ( d ) dominant wavelength ( d ) luminous intensity (i v ) luminous intensity (i v ) luminous intensity (i v ) 1800 mcd 1120 mcd 710 mcd 450 mcd 1800 mcd 1120 mcd 710 mcd 710 mcd 450 mcd 280 mcd
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct8.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps graphs 4/6 format #: cotco-d-074 rev.4 document no. spe/LP6-PPP2-01-N1 rev. no. 02 g g r r a a p p h h s s 0.0 100.0 40.0 60.0 80.0 20.0 forward voltage. green if (ma) vf(v) 4.6 5.0 3.8 3.0 3.4 4.2 forward current vs. blue fig.1 forward current vs. forward voltage. 0.0 20.0 1.8 2.0 100.0 60.0 40.0 80.0 if (ma) vf(v) 2.2 2.4 2.6 red 1.6
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct8.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps graphs 5/6 format #: cotco-d-074 rev.4 document no. spe/LP6-PPP2-01-N1 rev. no. 02 g g r r a a p p h h s s
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cld-ct8.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps cie graph the color coordinates of the mixed light can be expected within the area of the color triangle marked a). the achromatic point (x=0.33, y=0.33) is marked +. 6/6 format #: cotco-d-074 rev.4 document no. spe/LP6-PPP2-01-N1 rev. no. 02 g g r r a a p p h h s s the color coordinates of the mixed light can be expected within the ar ea of the color triangle marked a). the achromatic point (x=0 .33,y=0.33) is marked?+? items signatures date revision history prepared by wangfj 2007-04-05 rev.no date change description checked by xiejh 2007-04-05 02 2007-04-05 release approved by davidliu 2007-04-05 fcn# fcn20070101 data is subject to change without prior notice; pleas e refer to cotco website for the latest version. copyright@2002 cotco international ltd.
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 6 cld-ct8.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. 2/6 format #: cotco-d-074 rev.4 document no. spe/LP6-PPP2-01-N1 rev. no. 02 applications: d d i i m m e e n n s s i i o o n n d d r r a a w w i i n n g g - indoor and outdoor displays - backlighting - camera flash - rgb full color displays absolute maximum ratings at ta = 25 c absolute maximum rating items symbol r g b unit forward current *1 i f 80 80 80 ma peak forward current *2 i fp 200 100 100 ma reverse voltage v r 5 5 5 v power dissipation p d 200 410 410 mw operation temperature t opr -40 ~ + 100 c storage temperature tstg -40 ~ + 100 c junction temperature tj 110 110 110 c junction/ambient 1 chips on * 3 r th ja 250 210 210 c/w junction/ambient 3 chips on * 3 r th ja 500 300 300 c/w junction/solder point 1 chips on r th js 150 130 130 c/w junction/solder point 3 chips on r th js 150 160 160 c/w *1 single color light *2 pulse width<=0.1msec duty<=1/10 * 3 rth test condition: mounted on pc board fr 4(pad size >= 40mm 2 ) typical electrical & optical characteristics(ta = 25 c ) values parameter condition symbol r g b unit wavelength at peak emission i f =50ma o peak 620 521 468 nm dominant wavelength i f =50ma o dom 610-625 514-534 460~480 nm spectral bandwidth at 50% irel max i f =50ma ' o 24 38 28 nm viewing angle at 50% iv i f =50ma 2 t ? 120 120 120 deg. v f(avg) 2.0 4.0 4.0 v forward voltage i f =50ma v f(max) 2.5 5.1 5.1 v iv (min) 450 710 280 mcd luminous intensity i f =50ma iv (avg) 710 1000 450 mcd reverse current (max.) v r =5v i r 10 10 10 p a
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct8.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner: * contact your cree sales representative for ordering information. standard available kits* kit number description LP6-PPP2-01-N1-00001 120 full color, full rank, tape & reel * please contact your cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x wd/color 1: full-color distribution 2~9, a~z . . . : special request * i v 0: full luminous intensity distribution 1~9, a~z . . . : special request * v f 0: full forward v oltage distribution 1~9, a~z . . . : special request * pa cking type 0: standard = tape pack 1~9, a~z . . . : special request * standard/custom 0: standard c: custom product p/n
|
